[Factory direct] CNC nine-axis automatic winding machine, automatic nine-axis CNC winding machine, wholesale multi-axis uniform torque winding machine

Short Description:


  • Payment Terms: L/C,D/A,D/P,T/T
  • Uniform Moment Wire-Rewinding machine: Our wire-rewinding machine is an adjustable uniform rate, constant tension takingup system, which realizes rewinding effect by uniform moment wire-rewinding assembly. Its main purpose is for annealing and winding of stainless steel wire, copper wire and other metal wires, and the uniform moment wire-rewinding assembly may used in combination or in single.
  • Product Detail

    Product Tags

    Uniform speed torque take-up machine Take-up machine This winding, the tension is stable, the cable is even. While the equipment is being wound, the operator can perform the next loading and unloading, which reduces the winding cycle and improves efficiency. The winding machine can complete the operations of winding, hooking, tapping, rotating pole, cross-groove, thread cutting, and alternating rotation, and only requires manual picking and unwinding. When winding the wire, the lead wire of the tap is always kept until the end of the winding operation, which not only saves the working time of loosening the tap wire, but also avoids the bad occurrence of winding the tap wire into the coil by mistake. Angle rotation, the operator can choose any angle positioning, positioning is accurate and stable. Tensioner, the operator can set tension parameters in the program to ensure that the tension of the coil is sensitive and stable during the winding process. The program is simple and easy to learn, fill in the form of programming, without the need for professionals to operate, even the first time to use the Mite program can also be easily mastered. On the random display, it can display: the rotation direction of the main shaft, the number of coils, the angle, the winding time, etc., when a fault occurs, it automatically prompts the content of the fault.Compared with the prior art, this winding device has a simple structure and a wire diameter The advantages are uniform, not easy to break and tight winding.

    (Axle No.)

    Dimension(mm)

    Design Wire Diameter for Assembly(mm)

    32

    2700×100×120

    ①0.03-0.10
    ②0.10-0.30
    ③0.30-1.25
    ④0.25-1.25

    44

    4200×100×120

    48

    4400×100×120

    60

    6000×120×120

     

    Structure of utility model winding machine
    1. Frame; 2. Wire reel; 3. First wire reel; 4. Second wire reel; 5. Support plate; 6. Wire; 7. Switch knob; 8. Adjustment knob.
    The reel 2 is fixed to the frame I through the rotating shaft, and one end of the rotating shaft is directly connected to the output end of the power device. By setting the reel 2 at the output end of the torque motor, the torque motor outputs power at a constant torque, so that the reel 2 is at During the winding process, the speed is adjusted automatically according to the size of the winding drum, so that the moment acting on the wire during the entire winding process remains unchanged, preventing the wire diameter from being thinned or even broken due to excessive tension, or excessive tension The phenomenon of winding looseness caused by a small occurrence occurs. A wire device is provided on the upper right of the wire reel 2, the wire device includes a support plate 5 fixed on the frame I, and the two ends of the support plate 5 are respectively connected with a first wire reel 3 and a second wire reel 4 through a rotating shaft, and the first A wire reel 3 is provided at the upper right end of the second wire reel 4, and the wire 6 passes through the first wire reel 3 after exiting the wire drawing device, and then passes around the second wire reel 4 and then is wound on the wire reel 2. The rack I is also provided with a switch knob 7 for controlling the start and stop of the torque motor, and an adjustment knob 8 for adjusting the voltage of the torque motor. By adjusting the voltage of the torque motor, the pulling force exerted on the wire 6 by the torque motor can be adjusted. . When the winding work starts, first pass one end of the wire 6 through the first wire reel 3, then through the second wire reel 4, and finally connect to the wire reel 2, turn the switch knob 7 to start the torque motor to work, winding Start the wire work and observe the state of the wire 6 during winding. If there is a wire break and the wire 6 becomes smaller in diameter, immediately turn the adjusting knob 8 to reduce the torque acting on the wire 6; when the wire 6 is found to be wound When it is not tight, immediately turn the adjusting knob 8 to increase the torque acting on the wire 6 so that the torque meets the winding requirements.

     


    Our factory uniform torque winding machine 32, 44, 48, 60 (Axle No.); 2700-6000Dimension; Diameter 0.03--1.25mm, designed for annealing and winding of stainless steel wire, copper wire and aluminum wire. It can be used in combination with annealing and wire drawing machines, or used for winding or separately for annealing purposes only. The uniform torque winding machine is also called a uniform moment rewinding machine, a take-up machine; a system with a constant tension winding that can operate at an adjustable uniform rate. Uniform wire winding is achieved. Features: The wire rewinding device uses linear guides and ball screws to ensure the accuracy of the winding displacement and the long working life of the machine; PLC control and the diameter of the metal wire, the number of turns of each layer, the winding layer can be preset For true fully automatic winding; even winding displacement and stable tension; suitable for winding stainless steel wire, copper and aluminum cables.



  • Previous:
  • Next:

  • 
    WhatsApp Online Chat !